Antik AR-1 + Proline + Atom Jukes

BOOTS- ANTIK AR1

• Full grain leather upper (outside)
• Full grain leather liner (inside)
• Hypo-allergenic  Austrian medical foam tongue lining
• Heat moldable toebox and counters
• Abrasion resistant leather on toe
• Heel lace loop
• Integrated, shock absorbing, foam wedge heel
• Leather sole

   

Labeda Proline

• High rebound urethane cushions.
• Our king pin is made of 7000 Series Aluminum; it is lighter than and twice as strong as standard mild steel pins. Due to our special angle geometry it sees less stress than other skates which makes it less prone to breaking.
• Adjustment of the truck assembly is by a micrometer. You first loosen the tapered locking screw and by rotating the micrometer nut one mark at a time, either compresses or relaxes the cushions by .001 inch.
• The axle in our truck is the hardest, toughest and truest of all axles made held to the tightest of tolerances.
• The truck pivot pin is nestled in a porous bronze, oil for life, bearing.
• The trucks adjustment is done from the top, therefore you will never have to loosen or tighten the king pin or locking nut again, which eliminates the major cause of why king pins break

Atom Dubs

Say hello to all new Juke 2.0 for the 2011 season! Juke 2.0 sports lime green urethane wrapped around our glass-filled nylon hollow core hub. Available in 88A, 93A and 95A 

• 59mm x 38mm
• 88a, 93a, 95a
• Best for Roller Derby

Qube 8-Ball Bearings

• Qube 8 Ball is patterned after the Fafnir bearings of the late 70's usingthe 3D technology. The bearing contains 8 balls instead of the traditional 7 This bearing uses QUBE (pronounced "cube") technology. Qube = Quality, Utilizing Better Equipment
• Available 7mm or 8mm
• 8 balls instead of the traditional 7 allows the load to be spread over the entire bearings.
• These bearings are manufacturered using 3D modeling process to digitally map each bearing.